Rio Fuse Owner's Manual download pdf (Page 228)

55

Driving your vehicle

Ignition switch position

LOCK

The ignition key can be removed only in

the LOCK position.

When turning the ignition switch to the

LOCK position, push the key inward at

the ACC position and turn the key toward

the LOCK position.

Before leaving the driver’s seat, always

make sure the shift lever is engaged in

1st gear for the manual transaxle or P

(Park) for automatic transaxle, set the

parking brake fully and shut the engine

off.

ACC (Accessory)

The electrical accessories are operative.

ON

The warning lights can be checked before

the engine is started. This is the normal

running position after the engine is started.

Do not leave the ignition switch ON if the

engine is not running to prevent battery

discharge.

START

Turn the ignition switch to the START posi-

tion to start the engine. The engine will

crank until you release the key; then it

returns to the ON position.The brake warn-

ing light can be checked in this position.

OTD059016

WARNING - Ignition switch

Never turn the ignition switch to

LOCK or ACC while the vehicle is

moving.This would result in loss of

directional control and braking

function, which could cause an

accident.

WARNING - Steering wheel

Never reach for any controls

through the steering wheel while

the vehicle is in motion. The pres-

ence of your hand or arm in this

area could cause a loss of vehicle

control.

1 2 ... 223 224 225 226 227 228 229 230 231 232 233 ... 384 385

Comments to this Manuals

No comments